AX10 – CCF
AX10-CCF filter cartridge is the pre-filter used in the first stage of Xsential’s QuadRO reverse osmosis filtration system. It removes sediment and dirt particles and is essential for the protection of the RO membrane.
Specification:
- Flow Rate: 6 L/min
- Capacity: 29,000 litres
- Micron Rate: 5
- Max. Temperature: 38ºC
- Min. Pressure: 100 kPa
- Max. Pressure: 860 kPa (non-shock)
Filter Replacement Instructions
- Shut off the water supply
- Release the water pressure
- Grasp existing filter and remove by rotating left until it stops, then pull down releasing it from the filter head
- Align replacement filter guide channels with the corresponding posts of the filter head
- Insert the filter upward until it fully seats into the head, then rotate right until it stops
- Flush the system for 5 minutes before use
Caution: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Filters should be changed every six months or earlier for high water usage applications.
Warning: For commercial use with cold water only. Scheduled maintenance is recommended. Xsential cannot be liable for system failures due to improper maintenance.
AX10 – GAC
AX10-GAC filter cartridge is the pre-filter used in the second stage of the QuadRO filtration system. It removes chlorine, volatile organic compounds in water and is essential for the protection of the RO membrane.
Specification:
- Flow Rate: 6 L/min
- Capacity: 29,000 litres
- Micron Rate: 5
- Max. Temperature: 38ºC
- Min. Pressure: 100 kPa
- Max. Pressure: 860 kPa (non-shock)
Filter Replacement Instructions
- Shut off the water supply
- Release the water pressure
- Grasp existing filter and remove by rotating left until it stops, then pull down releasing it from the filter head
- Align replacement filter guide channels with the corresponding posts of the filter head
- Insert the filter upward until it fully seats into the head, then rotate right until it stops
- Flush the system for 5 minutes before use
Caution: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Filters should be changed every six months or earlier for high water usage applications.
Warning: For commercial use with cold water only. Scheduled maintenance is recommended. Xsential cannot be liable for system failures due to improper maintenance.
AX10 – ROM
AX10-ROM is the reverse osmosis (RO) membrane that removes dissolved particles in water and is used in the third stage of Xsential’s reverse osmosis systems. Depending on the amount of total dissolved solids (TDS) in the water, the RO membrane is used to significantly reduce the TDS to provide water that is perfect for use in commercial applications or home with kitchen equipment and coffee and ice machines to prevent scale build up and damage to your machines.
Appliances:
-Coffee Makers
-Ice Machines
-Distillers
-Steam Generators
Specification:
- Flow Rate: 6 L/min
- Min. Pressure: 420 kPa
- Max. Temperature: 38oC
- pH range: 2-11
- Max. Pressure: 860 kPa (non-shock)
- TDS: >500ppm
Filter Replacement Instructions
- Shut off the water supply
- Release the water pressure
- Grasp existing filter and remove by rotating left until it stops, then pull down releasing it from the filter head
- Align replacement filter guide channels with the corresponding posts of the filter head
- Insert the filter upward until it fully seats into the head, then rotate right until it stops
- Flush the system for 5 minutes before use
Caution: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Filters should be changed every six months or earlier for high water usage applications.
Warning: For commercial use with cold water only. Scheduled maintenance is recommended. Xsential cannot be liable for system failures due to improper maintenance.
AX10 – TX
AX1/‐TX cartridges manufactured using NSF certified carbon for better reduction of chlorine, taste and odour and other offensive contaminants in the water. It will consistently provide food safe scale inhibition to prolong the life of water feed appliances.
Reduces:
- Sediment
- Chlorine
- Unpleasant taste and odours
- Organic contaminants
- Scale
The system comes with easy to install accessories.
- 2M 3/8” tube
- 2 x 3/4” female x 3/8” OD connector
Caution: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Filters should be changed every six months or earlier for high water usage applications.
Warning: For commercial use with cold water only. Scheduled maintenance is recommended. Xsential cannot be liable for system failures due to improper maintenance.
AX10 – WS
AX10-WS is a water stabiliser cartridge which means it neutralises the pH of the water that comes out of a reverse osmosis system through a remineralisation process. This increases the conductivity in the water which allows for the efficient functioning of feed water appliances.
Operating Specifications
Nominal micron rating: 5
Min/max pressure: 70-875kPa
Min/max temperature: 2-38oC
Replace cartridge
- Turn off water supply
- Grab the cartridge and turn anti-clockwise and pull downward
- Push upward new cartridge and turn clockwise until stop
- Flush the cartridge for10 minutes after the replacement before consumption.
Caution: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Filters should be changed every six months or earlier for high water usage applications.
Warning: For commercial use with cold water only. Scheduled maintenance is recommended. Xsential cannot be liable for system failures due to improper maintenance.