AX10 – CCF

AX10-CCF filter cartridge is the pre-filter used in the first stage of Xsential’s QuadRO reverse osmosis filtration system.  It removes sediment and dirt particles and is essential for the protection of the RO membrane.

Specification:

1. Flow Rate: 6 L/min
2. Capacity: 29,000 litres
3. Micron Rate: 5
4. Max. Temperature: 38ºC
5. Min. Pressure: 100 kPa
6. Max. Pressure: 860 kPa (non-shock)

Filter Replacement Instructions

1. Shut off the water supply
2. Release the water pressure
3. Grasp existing filter and remove by rotating left until it stops, then pull down releasing it from the filter head
4. Align replacement filter guide channels with the corresponding posts of the filter head
5. Insert the filter upward until it fully seats into the head, then rotate right until it stops
6. Flush the system for 5 minutes before use

Caution: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Filters should be changed every six months or earlier for high water usage applications. 

Warning: For commercial use with cold water only.  Scheduled maintenance is recommended.  Xsential cannot be liable for system failures due to improper maintenance.