• support@xsential.com.au
  • 78 Daly Street, Ascot, WA6104
1300 366 295
Appointment

AX10 – ROM

AX10 – ROM

AX10 – ROM

AX10-ROM is the reverse osmosis (RO) membrane that removes dissolved particles in water and is used in the third stage of Xsential’s reverse osmosis systems.  Depending on the amount of total dissolved solids (TDS) in the water, the RO membrane is used to significantly reduce the TDS to provide water that is perfect for use in commercial applications or home with kitchen equipment and coffee and ice machines to prevent scale build up and damage to your machines.

Appliances:

-Coffee Makers
-Ice Machines
-Distillers
-Steam Generators

Specification:

  1. Flow Rate: 6 L/min
  2. Min. Pressure: 420 kPa
  3. Max. Temperature: 38oC
  4. pH range: 2-11
  5. Max. Pressure: 860 kPa (non-shock)
  6. TDS: >500ppm

Filter Replacement Instructions

  1. Shut off the water supply
  2. Release the water pressure
  3. Grasp existing filter and remove by rotating left until it stops, then pull down releasing it from the filter head
  4. Align replacement filter guide channels with the corresponding posts of the filter head
  5. Insert the filter upward until it fully seats into the head, then rotate right until it stops
  6. Flush the system for 5 minutes before use

Caution: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Filters should be changed every six months or earlier for high water usage applications. 

Warning: For commercial use with cold water only.  Scheduled maintenance is recommended.  Xsential cannot be liable for system failures due to improper maintenance.