AX5 – ZP

AX5-ZP removes sediment, rust and dirt particles from water.  This is a pre-filter for the AX5-TW and Pro-Q5 systems.

Specification:

1. Micron Rate: 5
2. Min. Pressure: 172 kPa
3. Flow Rate: 7 L/min
4. Max. Pressure: 860 kPa (non-shock)
5. Max. Temperature: 38ºC

Filter Replacement Instructions

1. Shut off the water supply
2. Turn on the faucet to release the water pressure
3. Grasp existing filter and remove by rotating left until it stops and pull down releasing it from the filter head
4. Align replacement filter guide channels with the corresponding posts of the filter head
5. Insert the filter upward until it fully seats into the head, then rotate right until it stops
6. Flush the system for 10 minutes before use

Caution: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Filters should be changed every six months or earlier for high water usage applications. 

Warning: For commercial use with cold water only.  Scheduled maintenance is recommended.  Xsential cannot be liable for system failures due to improper maintenance.