MN24-CTC
Xsential Pentair/ Everpure compatible cartridges are manufactured to the highest standard specification. They are approved to Australian Watermark standard. These filters have been tested and proven to perform as good as the original.
Features:
- Reduces particles and sediment
- Reduces chlorine
- Reduces unpleasant taste & odour.
Compatible with
- H-54
- S-54
- EF-1500
- EV-925266
Specification:
- Micron rating: 5 micron
- Working Temperature: 2-38 °C
- Working pressure: 70-850 kPa
Filter Replacement Instruction:
- Turn off the water supply
- Turn on the faucet handle to release the water pressure
- Grasp the filter cartridge and rotate it anti-clockwise until it stops
- Pull down and releasing it from the filter head
- Align replacement filter guide channels with the corresponding posts of the filter head and insert the cartridge upward until it fully seats into the head
- Rotate clockwise until it stops
- Turn on the water supply
Caution: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Filters should be changed every six months or earlier for high water usage applications.
Warning: For commercial use with cold water only. Scheduled maintenance is recommended. Xsential cannot be liable for system failures due to improper maintenance.