XSHG10 Standard Filter Housings are manufactured out of a durable polypropylene. Available with 1/4” or 3/4″ inlet and outlet ports. XSHG10 filter housings will accommodate a wide range of 21⁄2″ to 27⁄8″ diameter cartridges.
XSHG10 Standard Filter Housings are moulded from rugged reinforced polypropylene. They offer an outstanding chemical compatibility and are ideal for use in a variety of low-flow applications. They are ideal for many residential, commercial and industrial applications. These include under-sink and countertop residential filtration, pre- and post-reverse osmosis filtration, recreational vehicle filtration, food service and Humidifying systems.
The housing is Watermark (Australian Standard) approved for added peace of mind.
All single housing comes with a stainless steel bracket. They can be joint in series to use with different types of water cartridges for better filtration performance.
| MODEL | MAXIMUM DIMENSION | INITIAL (PSI) @ FLOW RATE (GPD) |
|---|---|---|
| XSHG10 | 121/4” x 51/8” (311 mm x 130 mm) | 1 psi @10 gpm (0.1 bar @ 38 Lpm |
| XSHG1034 | 121/4” x 51/8” (311 mm x 130 mm) with 3/4” ports | 1 psi @10 gpm (0.1 bar @ 38 Lpm |
Material Of Construction
- Housing: Polypropylene
- O-ring: NSF certified
- Maximum Temperature: 40°C
- Maximum Pressure: 125psi (850kPa)
- Colour available: White, or blue – depending on the inlet/ outlet size